Signal Flash
Signal Flash
| Shop->Cars->Motorcycle Parts and Accessories | ||||
|
Turn Signal Flash Control Resistors
USD 12.95 Set of 2 High Quality LED Flash Controllers / Resistors LED lights have a very low current draw, due to this when used as turn signals most motorcycles will cause the signals to flash faster than usually, as if there was a blown bulb. We have designed our Flash Controllers / Resistors to correct this problem and bring the flash rate back to approximately 60 FPM (Flashes Per Minute) One Flash Controller must be installed for each LED light Connected to the motorcycle signal circuit (Also include 
Notes : Earn 2% eBay Bucks on qualifying purchases! Backed by eBay Buyer Protection Program. Terms and Conditions apply. Stock Status : in-stock
|
|||
|
Turn Signal Flash Rate Control Relay
USD 14.95 High Quality LED Flash Controllers / Resistors LED lights have a very low current draw, due to this when used as turn signals most motorcycles will cause the signals to flash faster than usual, as if there was a blown bulb. We have designed our Flash Controllers / Resistors to correct this problem and bring the flash rate back to approximately 60 FPM (Flashes Per Minute) Fits Yamaha - R1, R6, YZF600, FZ1, FZ6, 09-10 V-Max Honda -1000RR, 07-09 600RR, 929RR, 900RR, CB919F RVT1000R RC51, VTR1000R
Notes : Earn 2% eBay Bucks on qualifying purchases! Backed by eBay Buyer Protection Program. Terms and Conditions apply. Stock Status : in-stock
|
|||
|
Yamaha R1 R6 Fz1 Turn Signal Flash Rate Control Relay
USD 14.95 High Quality LED Flash Controllers / Resistors LED lights have a very low current draw, due to this when used as turn signals most motorcycles will cause the signals to flash faster than usual, as if there was a blown bulb. We have designed our Flash Controllers / Resistors to correct this problem and bring the flash rate back to approximately 60 FPM (Flashes Per Minute) Fits Yamaha - R1, R6, YZF600, FZ1, FZ6, 09-10 V-Max Honda -1000RR, 07-09 600RR, 929RR, 900RR, CB919F RVT1000R RC51, VTR1000R
Notes : Earn 2% eBay Bucks on qualifying purchases! Backed by eBay Buyer Protection Program. Terms and Conditions apply. Stock Status : in-stock
|
|||
|
Kisan SignalMinder SM-4 Automatic Turn Signal Canceller
USD 107.95 BE SURE! Do you forget to turn off the signals once in a while? It may be embarrassing when you realize it, but also quite unsafe in the traffic. SignalMinder stops the flashing automatically. You simply replace the flasher on your motorcycle. SM-4 unit is designed as a plug-in replacement for Newer Yamaha V-Star & Road-Star and Victory Kingpin & Vegas models with 5-pin connectors. SignalMinder uses a computer chip to cancel the turn signals. There are three (3) selectable timeouts; 10, 20, 30 seconds. Running Light Option By attaching two quick-connect wires included, you can convert ALL FOUR turn signals to running lights and establish a dual-channel system on your motorcycle. Using the DIP Switch #1, you can keep them off and still have the dual-channel system. With the dual-channel system, when you activate the RIGHT turn signal three times in succession, you get 4-way hazard flash function. Brake Override Option If you hook-up the 12 volt supply from the brakes, SignalMinder will suspend the time-out feature until the brakes are released. This allows continued flashing for those times when you are waiting at the signals to make a turn and do not want the time-out to cancel the flashing. Handle Bar Return Springs If above options are hooked-up, these tiny return springs can be inserted in the handlebar switch to force it back to neutral automatically. You don't have use the Push-to-cancel of the handlebar switch. Above options are not required to be installed, but utilizing them allows fully automatic turn signal cancellation. We highly recommend to hook them up. Please Note! NONE of the wires on the motorcycle have to be cut. The kit includes Scothclok brand of Insulation Displacement Connectors (IDC) to tap into existing wires. The last thing you need is to worry about canceling the turn signals! Use all of the built-in options of the SignalMinder and enjoy the ride.
Notes : Fantastic prices with ease & comfort of Amazon.com! Stock Status : in-stock
|
|||
|
Badlands Metric Flash Pro
USD 41.36 Replace your stock 2 or 3 prong flasher with the Badlands Metric Flash Pro which has a built in solid state flasher and load equalizer. Restores turn signal flash rate when switching from halogen to L
Notes : Stock Status : in-stock
|
|||
|
Kisan SignalMinder SM-3 Automatic Turn Signal Canceller
USD 98.95 BE SURE! Do you forget to turn off the signals once in a while? It may be embarrassing when you realize it, but also quite unsafe in the traffic. SignalMinder stops the flashing automatically. You simply replace the flasher on your motorcycle. SM-3 unit is designed as a plug-in replacement for Most Honda, Kawasaki, Suzuki, and some newer European motorcycles with a 3-pin (|||) plug. SignalMinder uses a computer chip to cancel the turn signals. There are three (3) selectable timeouts; 10, 20, 30 seconds. Running Light Option By attaching two quick-connect wires included, you can convert ALL FOUR turn signals to running lights and establish a dual-channel system on your motorcycle. Using the DIP Switch #1, you can select the running light intensity to be 1/2 or 1/3 brightness. With the dual-channel system, when you activate the RIGHT turn signal three times in succession, you get 4-way hazard flash function. Brake Override Option If you hook-up the 12 volt supply from the brakes, SignalMinder will suspend the time-out feature until the brakes are released. This allows continued flashing for those times when you are waiting at the signals to make a turn and do not want the time-out to cancel the flashing. Handle Bar Return Springs If above options are hooked-up, these tiny return springs can be inserted in the handlebar switch to force it back to neutral automatically. You don't have use the Push-to-cancel of the handlebar switch. Above options are not required to be installed, but utilizing them allows fully automatic turn signal cancellation. We highly recommend to hook them up. Please Note! NONE of the wires on the motorcycle have to be cut. The kit includes Scothclok brand of Insulation Displacement Connectors (IDC) to tap into existing wires. The last thing you need is to worry about canceling the turn signals! Use all of the built-in options of the SignalMinder and enjoy the ride.
Notes : Fantastic prices with ease & comfort of Amazon.com! Stock Status : in-stock
|
|||
|
Signal Dynamics Dual-Load Equalizer 01008
USD 18.99 Keeps your turn signals flashing at the stock rate when you convert from incandescent to LED Solid-state unit with weather-proof, soft-cell technology Installs using included double-sided tape Measures 2 1/4 in. L x 1
Notes : Same day shipping – No hassle returns Stock Status : in-stock
|
|||
|
Signal Dynamics Brake Hold Module 01020
USD 61.99 Holds your brake lights on after you release them and are still decelerating or stopped Mode one: three short flashes followed by a 3.5 second flash; repeats until you accelerate Mode two: five short flashes followed by a conss
Notes : Same day shipping – No hassle returns Stock Status : in-stock
|
|||
|
Resistors - Turn Signals Light Flash Controllers
USD 12.95 Set of 2 High Quality LED Flash Controllers / Resistors LED lights have a very low current draw, due to this when used as turn signals most motorcycles will cause the signals to flash faster than usually, as if there was a blown bulb. We have designed our Flash Controllers / Resistors to correct this problem and bring the flash rate back to approximately 60 FPM (Flashes Per Minute) One Flash Controller must be installed for each LED light Connected to the motorcycle signal circuit (Also includes Tail Integrators) Installation: Locate the LED Turn Signal Wires. The Flash Controller Should be installed with one lead wire to one signal wire, (+ Positive) the other lead wire to the other signal wire. (- Negative) Polarity need not be observed. Select a location for the Flash Controller (Note- It will get very warm when the signal is flashing so avoid mounting on the fairing) Using the scotchlock wire connectors provided splice the Flash Controller into the signal light wires. Wires may be shortened if desired. If your current setup has 3 wires you would Omit the Running light wire and only use the + and - Leads.
Notes : Fantastic prices with ease & comfort of Amazon.com! Stock Status : in-stock
|
|||
|
Turn Signals - Led Mini Surface Mount Signals
USD 14.95 These Mini LED Signals offer many different mounting possibilities. They mount using double sided tape (Included) Also included are self tapping screws for more mounting possibilities. These signals are very small, Flash Controllers are not required but recommended with this item, they are available separately in my eBay store by clicking here . Stats: One Pair of Mini LED Motorcycle Turn Signals Wiring: Two Wire, 12 Volt Systems Bulb: 4 Amber LED's Per Signal Install: Universal Signal, will fi
Notes : Earn 2% eBay Bucks on qualifying purchases! Backed by eBay Buyer Protection Program. Terms and Conditions apply. Stock Status : in-stock
|
|||
|
Kisan SignalMinder SM-3R Automatic Turn Signal Canceller
USD 107.95 BE SURE! Do you forget to turn off the signals once in a while? It may be embarrassing when you realize it, but also quite unsafe in the traffic. SignalMinder stops the flashing automatically. You simply replace the flasher on your motorcycle. SM-3R unit is designed as a plug-in replacement for the newer Honda motorcycle models with 9-pin connectors such as the VTX-N and Rune. SignalMinder uses a computer chip to cancel the turn signals. There are three (3) selectable timeouts; 10, 20, 30 seconds. Running Light Option By attaching two quick-connect wires included, you can convert ALL FOUR turn signals to running lights and establish a dual-channel system on your motorcycle. Using the DIP Switch #1, you can select the running light intensity to be 1/2 or 1/3 brightness. With the dual-channel system, when you activate the RIGHT turn signal three times in succession, you get 4-way hazard flash function. Brake Override Option If you hook-up the 12 volt supply from the brakes, SignalMinder will suspend the time-out feature until the brakes are released. This allows continued flashing for those times when you are waiting at the signals to make a turn and do not want the time-out to cancel the flashing. Handle Bar Return Springs If above options are hooked-up, these tiny return springs can be inserted in the handlebar switch to force it back to neutral automatically. You don't have use the Push-to-cancel of the handlebar switch. Above options are not required to be installed, but utilizing them allows fully automatic turn signal cancellation. We highly recommend to hook them up. Please Note! NONE of the wires on the motorcycle have to be cut. The kit includes Scothclok brand of Insulation Displacement Connectors (IDC) to tap into existing wires. The last thing you need is to worry about canceling the turn signals! Use all of the built-in options of the SignalMinder and enjoy the ride.
Notes : Fantastic prices with ease & comfort of Amazon.com! Stock Status : in-stock
|
|||
|
Kisan SignalMinder SM-3S Automatic Turn Signal Canceller
USD 98.95 BE SURE! Do you forget to turn off the signals once in a while? It may be embarrassing when you realize it, but also quite unsafe in the traffic. SignalMinder stops the flashing automatically. You simply replace the flasher on your motorcycle. SM-3S unit is designed as a plug-in replacement for many Japanese models such as Suzuki and Kawasaki and smaller size motorcycles with a 2-pin (||) plug. Extra ground wire of the unit must be attached to a good chassis location. SignalMinder uses a computer chip to cancel the turn signals. There are three (3) selectable timeouts; 10, 20, 30 seconds. Running Light Option By attaching two quick-connect wires included, you can convert ALL FOUR turn signals to running lights and establish a dual-channel system on your motorcycle. Using the DIP Switch #1, you can select the running light intensity to be 1/2 or 1/3 brightness. With the dual-channel system, when you activate the RIGHT turn signal three times in succession, you get 4-way hazard flash function. Brake Override Option If you hook-up the 12 volt supply from the brakes, SignalMinder will suspend the time-out feature until the brakes are released. This allows continued flashing for those times when you are waiting at the signals to make a turn and do not want the time-out to cancel the flashing. Handle Bar Return Springs If above options are hooked-up, these tiny return springs can be inserted in the handlebar switch to force it back to neutral automatically. You don't have use the Push-to-cancel of the handlebar switch. Above options are not required to be installed, but utilizing them allows fully automatic turn signal cancellation. We highly recommend to hook them up. Please Note! NONE of the wires on the motorcycle have to be cut. The kit includes Scothclok brand of Insulation Displacement Connectors (IDC) to tap into existing wires. The last thing you need is to worry about canceling the turn signals! Use all of the built-in options
Notes : Fantastic prices with ease & comfort of Amazon.com! Stock Status : in-stock
|
|||
|
K&S Turn Signal Resistors
USD 11.66   Features   -Corrects the "fast-flash" problem when using LED turn signals   -Simple splice in installation&nbs
Notes : Stock Status : in-stock
|
|||
|
LED Turn Signal Flash Controller Relay 3 Pin - Flasher Control - Universal - Triumph, Yamaha, Kawasaki, Honda
USD 14.95 High Quality 3-Prong LED Flash Relay This Flash Relay will work with Conventional bulbs and/or LED's. Use it to replace a bad relay or correct the fast Flashing encountered when using LED signals. (Usually the Relay is found under your seat or behind instrument cluster)
Notes : Fantastic prices with ease & comfort of Amazon.com! Stock Status : in-stock
|
|||
|
Signal Dynamics Dual Load Equalizer
USD 17.99 Signal Dynamics Dual-Load Equalizer allows stock incandescent turn signals to be replaced without having to replace the stock flasher module. A load equalizer keeps signals flashing at a stock rate. This module works with LED lights and can correct rapid flashing or non-functional turn signals after lights have been changed from incandescent bulbs. This module is installed with double sided tape, doesn't require splicing. NOTE: On late models H-D equipped with factory / stock security systems the security light will still be lit, will function fully, and will not b damaged by installing the dual-load equalizer.
Notes : Fantastic prices with ease & comfort of Amazon.com! Stock Status : in-stock
|
|||
|
Custom Dynamics Knight Riderz Light Bars - Non-Sequential Light Bar w/ Non-Flashing Brake Alert - Red LB01
USD 23.96 Feature 12 super-bright LEDs3M double-sided tape for easy mountingWork with any 12V DC system with no load equalizer or resistors requiredNon-sequential light bars have dual-intensity capability and can be used as running, brake, and turn when used in conjunction with a Custom Dynamics controller; your choice of flashing or non-flashing brake alertSequential light bar features Knight Riderz side-to-side sequencing in running light mode and a flashing brake alertSequential LED turn signal light bars will work with flashers that flash between 60-120 times per second, the standard DOT rate; perfect for auxiliary turn signals, mounts to saddle bags or trike fenders
Notes : Fantastic prices with ease & comfort of Amazon.com! Stock Status : in-stock
|
|||
|
Custom Dynamics Knight Riderz Light Bars - Sequential Light Bar w/ Flashing Brake Alert - Red LB02
USD 30.02 Feature 12 super-bright LEDs3M double-sided tape for easy mountingWork with any 12V DC system with no load equalizer or resistors requiredNon-sequential light bars have dual-intensity capability and can be used as running, brake, and turn when used in conjunction with a Custom Dynamics controller; your choice of flashing or non-flashing brake alertSequential light bar features Knight Riderz side-to-side sequencing in running light mode and a flashing brake alertSequential LED turn signal light bars will work with flashers that flash between 60-120 times per second, the standard DOT rate; perfect for auxiliary turn signals, mounts to saddle bags or trike fenders
Notes : Fantastic prices with ease & comfort of Amazon.com! Stock Status : in-stock
|
|||
|
Rumble Concepts Ghost Flush Mount LED Signals RU27892
USD 53.81 Replaces the O.E. front turn signalsNo modifications needed due to its bolt-on styleAmber L.E.D.s covered by a clear waterproof lens for high visibilitySold as a pairNote: Will require a Rumble Flash Relay to normalize the flash rate.This Item Fits the Following Applications:2009 Kawasaki EX500 Ninja 500R2008 Kawasaki ZZR 6002008 Kawasaki EX500 Ninja 500R2007 Kawasaki ZZR 6002006 Kawasaki ZZR 6002006 Kawasaki ZX636 Ninja ZX-6R2005 Yamaha FZS1000 FZ12005 Kawasaki ZZR 6002005 Kawasaki ZX636 Ninja ZX-6R2005 Kawasaki ZX600 Ninja ZX6-RR2005 Kawasaki ZX1200 Ninja ZX-12R2005 Kawasaki ZX1000 Ninja ZX-10R2004 Yamaha FZS1000 FZ12004 Kawasaki ZX636 Ninja ZX-6R2004 Kawasaki ZX600 Ninja ZX6-RR2004 Kawasaki ZX1200 Ninja ZX-12R2004 Kawasaki ZX1000 Ninja ZX-10R2003 Yamaha FZS1000 FZ12003 Kawasaki ZX900 Ninja ZX-9R2003 Kawasaki ZX750 Ninja ZX-7R2003 Kawasaki ZX636 Ninja ZX-6R2003 Kawasaki ZX600 Ninja ZX6-RR2003 Kawasaki ZX1200 Ninja ZX-12R2002 Yamaha YZF-R62002 Yamaha FZS1000 FZ12002 Kawasaki ZX900 Ninja ZX-9R2002 Kawasaki ZX750 Ninja ZX-7R2002 Kawasaki ZX1200 Ninja ZX-12R2001 Yamaha YZF-R62001 Yamaha YZF-R12001 Yamaha FZS1000 FZ12001 Kawasaki ZX900 Ninja ZX-9R2001 Kawasaki ZX750 Ninja ZX-7R2001 Kawasaki ZX1200 Ninja ZX-12R2000 Yamaha YZF-R62000 Yamaha YZF-R12000 Kawasaki ZX900 Ninja ZX-9R2000 Kawasaki ZX750 Ninja ZX-7R2000 Kawasaki ZX1200 Ninja ZX-12R1999 Yamaha YZF-R61999 Yamaha YZF-R11999 Kawasaki ZX900 Ninja ZX-9R1999 Kawasaki ZX750 Ninja ZX-7R1998 Yamaha YZF-R11998 Kawasaki ZX900 Ninja ZX-9R1998 Kawasaki ZX750 Ninja ZX-7R1997 Kawasaki ZX750 Ninja ZX-7R1996 Kawasaki ZX750 Ninja ZX-7R
Notes : Fantastic prices with ease & comfort of Amazon.com! Stock Status : in-stock
|
|||
|
Universal Turn Signal Flasher Relay
USD 19.95 When converting incandescent turn signal bulbs into LEDs, the "flash rate? may be too fast. A common solution is to purchase and install two or more load equalizers. However, load equalizers may produce dangerous heat and they use just as much power as the original incandescent bulbs. This fully solid-state relay uses advanced electronic technology to adjust the flash rate of ANY LED turn signal to a standard 60 per minute flash rate and NO HEAT is generated. It uses virtually no power and is plug-n-play compatible with any motorcycle. Technical Specifications - Maximum operation amperage: 15A - Minimum operation amperage: 0.1A
Notes : Fantastic prices with ease & comfort of Amazon.com! Stock Status : in-stock
|
|||
My LED Turn Signals on my 2010 Kawasaki Ninja 250R wont flash.?
I bought after market turn signals for my motorcycle and also bought a relay kit for these LED’s. I hooked them up but they wont flash. I tried to see what the problem was but I’m still trying to figure it out. Can you help me?
You hooked it up wrong…..?
Signal Flash
