Signal Flash
Posted August 31, 2011
By admin
Signal Flash
| Shop->Cars->Motorcycle Parts and Accessories | ||||
|
Turn Signal Flash Rate Control Relay
USD 13.45 High Quality LED Flash Controllers / Resistors LED lights have a very low current draw, due to this when used as turn signals most motorcycles will cause the signals to flash faster than usual, as if there was a blown bulb. We have designed our Flash Controllers / Resistors to correct this problem and bring the flash rate back to approximately 60 FPM (Flashes Per Minute) Fits Yamaha - R1, R6, YZF600, FZ1, FZ6, 09-10 V-Max Honda -1000RR, 07-09 600RR, 929RR, 900RR, CB919F RVT1000R RC51, VTR1000R 
Notes : Earn 2% eBay Bucks on qualifying purchases! Backed by eBay Buyer Protection Program. Terms and Conditions apply. Stock Status : in-stock
|
|||
|
Turn Signal Flash Control Resistors
USD 12.95 Set of 2 High Quality LED Flash Controllers / Resistors LED lights have a very low current draw, due to this when used as turn signals most motorcycles will cause the signals to flash faster than usually, as if there was a blown bulb. We have designed our Flash Controllers / Resistors to correct this problem and bring the flash rate back to approximately 60 FPM (Flashes Per Minute) One Flash Controller must be installed for each LED light Connected to the motorcycle signal circuit (Also include
Notes : Earn 2% eBay Bucks on qualifying purchases! Backed by eBay Buyer Protection Program. Terms and Conditions apply. Stock Status : in-stock
|
|||
|
Led Motorcycle Signal Resistor Flash Control Slow
USD 12.00 LED INDICATOR RESISTOR KIT Fix the fast blink rate the led signal switchover has caused on your motorcycle! LED Replacement signals / indicators work to a lower wattage than standard bulb-type indicators. It may be necessary therefore to parallel in this resistor pack into the motorcycles signal circuit to slow the blink rate down. This specially designed LED resistor pack provides the load the signals all in one convenient package complete with heat sink mounting. Two kits will be needed per Motorcycle, one for the right and left signals Model: WRELED04 If you need a LED Relay Model: WRELED04
Notes : Earn 2% eBay Bucks on qualifying purchases! Backed by eBay Buyer Protection Program. Terms and Conditions apply. Stock Status : in-stock
|
|||
|
Yamaha R1 R6 Fz1 Turn Signal Flash Rate Control Relay
USD 13.45 Yamaha - R1, R6, YZF600, FZ1, FZ6, 09-10 V-Max Honda -1000RR, 07-09 600RR, 929RR, 900RR, CB919F RVT1000R RC51, VTR1000R Super Hawk CBR600 F2, F3, F4, F4i Kawasaki - ZX-10R, ZX-12R, ZX-6R, ZX-6RR, 05-06 ZX636 Z-1000, ZXR1200, ZZR 1200, ZX1200, ZR-7 96-10 Suzuki DR-650 09 KTM 690 R Enduro 06-08 Triumph Dayton 675 Quick Facts: Yes No Is Item New? Install Instructions?
Notes : Earn 2% eBay Bucks on qualifying purchases! Backed by eBay Buyer Protection Program. Terms and Conditions apply. Stock Status : in-stock
|
|||
|
Resistors - Turn Signals Light Flash Controllers
USD 12.95 Set of 2 High Quality LED Flash Controllers / Resistors LED lights have a very low current draw, due to this when used as turn signals most motorcycles will cause the signals to flash faster than usually, as if there was a blown bulb. We have designed our Flash Controllers / Resistors to correct this problem and bring the flash rate back to approximately 60 FPM (Flashes Per Minute) One Flash Controller must be installed for each LED light Connected to the motorcycle signal circuit (Also includes Tail Integrators) Installation: Locate the LED Turn Signal Wires. The Flash Controller Should be installed with one lead wire to one signal wire, (+ Positive) the other lead wire to the other signal wire. (- Negative) Polarity need not be observed. Select a location for the Flash Controller (Note- It will get very warm when the signal is flashing so avoid mounting on the fairing) Using the scotchlock wire connectors provided splice the Flash Controller into the signal light wires. Wires may be shortened if desired. If your current setup has 3 wires you would Omit the Running light wire and only use the + and - Leads.
Notes : Fantastic prices with ease & comfort of Amazon.com! Stock Status : in-stock
|
|||
|
Kisan SignalMinder SM-3R Automatic Turn Signal Canceller
USD 107.95 BE SURE! Do you forget to turn off the signals once in a while? It may be embarrassing when you realize it, but also quite unsafe in the traffic. SignalMinder stops the flashing automatically. You simply replace the flasher on your motorcycle. SM-3R unit is designed as a plug-in replacement for the newer Honda motorcycle models with 9-pin connectors such as the VTX-N and Rune. SignalMinder uses a computer chip to cancel the turn signals. There are three (3) selectable timeouts; 10, 20, 30 seconds. Running Light Option By attaching two quick-connect wires included, you can convert ALL FOUR turn signals to running lights and establish a dual-channel system on your motorcycle. Using the DIP Switch #1, you can select the running light intensity to be 1/2 or 1/3 brightness. With the dual-channel system, when you activate the RIGHT turn signal three times in succession, you get 4-way hazard flash function. Brake Override Option If you hook-up the 12 volt supply from the brakes, SignalMinder will suspend the time-out feature until the brakes are released. This allows continued flashing for those times when you are waiting at the signals to make a turn and do not want the time-out to cancel the flashing. Handle Bar Return Springs If above options are hooked-up, these tiny return springs can be inserted in the handlebar switch to force it back to neutral automatically. You don't have use the Push-to-cancel of the handlebar switch. Above options are not required to be installed, but utilizing them allows fully automatic turn signal cancellation. We highly recommend to hook them up. Please Note! NONE of the wires on the motorcycle have to be cut. The kit includes Scothclok brand of Insulation Displacement Connectors (IDC) to tap into existing wires. The last thing you need is to worry about canceling the turn signals! Use all of the built-in options of the SignalMinder and enjoy the ride.
Notes : Fantastic prices with ease & comfort of Amazon.com! Stock Status : in-stock
|
|||
|
LED Turn Signal Flash Controller Relay 3 Pin - Flasher Control - Universal - Triumph, Yamaha, Kawasaki, Honda
USD 14.95 High Quality 3-Prong LED Flash Relay This Flash Relay will work with Conventional bulbs and/or LED's. Use it to replace a bad relay or correct the fast Flashing encountered when using LED signals. (Usually the Relay is found under your seat or behind instrument cluster)
Notes : Fantastic prices with ease & comfort of Amazon.com! Stock Status : in-stock
|
|||
|
Turn Signals - Led Mini Surface Mount Signals
USD 13.45 These Mini LED Signals offer many different mounting possibilities. They mount using double sided tape (Included) Also included are self tapping screws for more mounting possibilities. These signals are very small, Flash Controllers are not required but recommended with this item, they are available separately in my eBay store by clicking here . Stats: One Pair of Mini LED Motorcycle Turn Signals Wiring: Two Wire, 12 Volt Systems Bulb: 4 Amber LED's Per Signal Install: Universal Signal, will fi
Notes : Earn 2% eBay Bucks on qualifying purchases! Backed by eBay Buyer Protection Program. Terms and Conditions apply. Stock Status : in-stock
|
|||
|
Badlands M/C Products Metric Flash Pro MFP-01
USD 45.39 Replace your stock 2- or 3-prong flasher with this moduleHas built-in solid-state flasher and load equalizerRestores turn signal flash rate when switching from halogen to LED or small incandescent signals are addedSolid-state, waterproof and plugs into most systemsCompatible with our Metric Illuminator and Illuminator SportIncludes step-by-step, easy-to-follow instructions
Notes : Fantastic prices with ease & comfort of Amazon.com! Stock Status : in-stock
|
|||
|
Signal Dynamics Dual Load Equalizer
USD 17.99 Signal Dynamics Dual-Load Equalizer allows stock incandescent turn signals to be replaced without having to replace the stock flasher module. A load equalizer keeps signals flashing at a stock rate. This module works with LED lights and can correct rapid flashing or non-functional turn signals after lights have been changed from incandescent bulbs. This module is installed with double sided tape, doesn't require splicing. NOTE: On late models H-D equipped with factory / stock security systems the security light will still be lit, will function fully, and will not b damaged by installing the dual-load equalizer.
Notes : Fantastic prices with ease & comfort of Amazon.com! Stock Status : in-stock
|
|||
|
Rumble Concepts LED Signals - Mini Flash LED - 2.0in x .75in - Black BE36913
USD 36.51 Used to replace front and rear turn signalsNext generation L.E.D. bulbs (amber in most applications)Clear lens
Notes : Fantastic prices with ease & comfort of Amazon.com! Stock Status : in-stock
|
|||
|
Signal Dynamics Dual-Load Equalizer 01008
USD 23.59 Allows conversion of stock incandescent turn signals to LED; keeps signals flashing at stock rateSolid-state electronicsWeather-proof, soft-cell technology to prevent wire damageMeasures 21/4in L x 15/8in W x 5/8in HOn late model H-D equipped with factory security system, the security key light will still be lit; the system will still function fully and will not be damaged by using the dual-load equalizerInstalls easily with included double-sided tapeMade in the U.S.A.
Notes : Fantastic prices with ease & comfort of Amazon.com! Stock Status : in-stock
|
|||
My LED Turn Signals on my 2010 Kawasaki Ninja 250R wont flash.?
I bought after market turn signals for my motorcycle and also bought a relay kit for these LED’s. I hooked them up but they wont flash. I tried to see what the problem was but I’m still trying to figure it out. Can you help me?
You hooked it up wrong…..?
Signal Flash
